Mark Tillack

Mark Tillack is currently pursuing research on laser-matter interactions and applications of high energy pulsed lasers as well as magnetic and inertial fusion energy technology.

Mark Tillack received his Ph.D. in nuclear engineering in 1983 from the Massachusetts Institute of Technology and has been involved in energy research since that time. He was a member of the UCLA Institute for Plasma and Fusion Research from 1983-1994 where he held the title Principal Institute Scientist. From 1994 until the present he has been a member of the Mechanical and Aerospace Engineering department at UC San Diego, and is currently the Associate Director of the Center for Energy Research. In 1995 he was a Guest Research Scientist in the Institute for Applied Thermo- and Fluid Dynamics at Forschungszentrum Karlsruhe in Germany. In 2007 he held the position of Visiting Professor at Kyoto University in the Institute for Advanced Energy, and in 2010 he was Visiting Professor at the Universidad Politécnica de Madrid in the nuclear engineering department.

Publications:

A.I-154
X. R. Wang, M. S. Tillack, C. Koehly, S. Malang, H. H. Toudeshki, F. Najmabadi and the ARIES Team, “ARIES-ACT2 DCLL power core design and engineering,” Fusion Science and Technology 67 (2015) 193-219.

A.I-153
X. R. Wang, M. S. Tillack, C. Koehly, S. Malang, F. Najmabadi and the ARIES Team, “ARIES-ACT1 system configuration, assembly and maintenance,” Fusion Science and Technology 67 (2015) 22-48.
 
A.I-152
M. S. Tillack, X. R. Wang, D. Navaei, H. H. Toudeshki, A. F. Rowcliffe, F. Najmabadi, and the ARIES Team, “Design and analysis of the ARIES-ACT1 fusion core,” Fusion Science and Technology 67 (2015) 49-74.

A.I-151
C. E. Kessel, M. S. Tillack, F. Najmabadi et al., “The ARIES Advanced and Conservative Tokamak (ACT) Power Plant Study,” Fusion Science and Technology 67 (2015) 1-21.
 
A.I-150
C. Koehly, M. S. Tillack, X. R. Wang, Farrokh Najmabadi, S. Malang and the ARIES Team, “Comparison of possible flow distribution systems for PbLi self-cooled blankets with respect to MHD, fabrication and maintenance,” IEEE Transactions on Plasma Science 42 (2014) 516-523.

A.I-149
D. Navaei, X. R. Wang, M. S. Tillack, S. Malang and the ARIES Team, "Elastic-plastic analysis of the steel-to-tungsten transition joint for a high performance divertor," Fusion Engineering and Design 88 (5), 2013, pp. 361 - 367.

A.I-148
X. R. Wang, M. S. Tillack, S. Malang, F. Najmabadi and the ARIES Team "Overall Power Core Configuration and System Integration for the ARIES-ACT Fusion Power Plant," Fusion Science and Technology 64(3), 2013, 455-459.

A.I-147
C. E. Kessel, M. S. Tillack and J. P. Blanchard "The Evaluation of the Heat Loading from Steady, Transient, and Off-Normal Conditions in ARIES Power Plants," Fusion Science and Technology 64(3), 2013, 440-448.

A.I-146
M. S. Tillack, X. R. Wang, S. Malang, F. Najmabadi and the ARIES Team, "ARIES-ACT1 Power Core Engineering," Fusion Science and Technology 64(3), 2013, 427-434.

A.I-145
M. S. Tillack, A. D. Turnbull, C. E. Kessel, et al, "Summary of the ARIES Town Meeting: Edge Plasma Physics and Plasma Material Interactions in the Fusion Power Plant Regime," Nuclear Fusion 53 (2013) 027003.

A.I-144
D. T. Goodin, N. B. Alexander, G. E. Besenbruch, A. S. Bozek, L. C. Brown, L. C. Carlson, G. W. Flint, P. Goodman, J. D. Kilkenny, W. Maksaereekul, B. W. McQuillan, A. Nikroo, R. R. Paguio, R. W. Petzoldt, R. Raffray, D. G. Schroen, J. D. Sheliak, J. Spalding, J. E. Streit, M. S. Tillack, and B. A. Vermillion "Developing a commercial production process for 500 000 targets per day: A key challenge for inertial fusion energy," Physics of Plasmas,13 056305, 2006.

A.I-143
Lane Carlson, Mark Tillack, Farrokh Najmabadi, and Charles Kessel, "Development, Visualization, and Application of the ARIES Systems Code," IEEE Transactions on Plasma Science,40 (3) 552-556 (March 2012).

A.I-142
X. R. Wang, S. Malang, M. S. Tillack, J. Burke and the ARIES Team, "Recent Improvements of the Helium-Cooled W-based Divertor for Fusion Power Plants," Fusion Engineering and Design 87 (2012) 732-736.

A.I-141
S. Yuspeh, Y. Tao, R. A. Burdt, M. S. Tillack, Y. Ueno, and F. Najmabadi, "Dynamics of laser-produced Sn microplasma for a high-brightness extreme ultraviolet light source," Applied Physics Letters 98, 201501 (2011).

A.I-140
S. Malang, M. S. Tillack, C. P. C. Wong, N. B. Morley and S. Smolentsev, "Development of the lead lithium (DCLL) blanket concept," Fusion Science and Technology, 60 (1) July 2011, 249-256.

A.I-139
T. Muroga, D.K. Sze, K. Okuno, T. Terai, A. Kimura, R. Kurtz, A. Sagara, R. Nygren, Y. Ueda, R. Doerner, P. Sharpe, T. Kunugi, N. Morley, Y. Hatano, M. Sokolov, T. Yamamoto, A. Hasegawa, Y. Katoh, N. Ohno, K. Tokunaga, S. Konishi, S. Fukada, P. Calderoni, T. Yokomine, K. Messadek, Y. Oya, N. Hashimoto, T. Hinoki, H. Hashizume, T. Norimatsu, T. Shikama, R. Stoller, K.A. Tanaka, M. S. Tillack "Midterm summary of Japan-US fusion cooperation program TITAN," Fusion Science and Technology, 60 (1) July 2011, 321-328.

A.I-138
J. P. Blanchard, C. J. Martin, M. S. Tillack, and X. R. Wang, "Ratchetting Models for Fusion Component Design," Fusion Science and Technology, 60 (1) July 2011, 313-317.

A.I-137
D. Navaei, X. R. Wang, M. S. Tillack, S. Malang and the ARIES Team, "Elastic-plastic analysis of transition joints for high performance divertor target plate," Fusion Science and Technology, 60 (1) July 2011, 233-237.

A.I-136
L. C. Carlson, M. S. Tillack, F. Najmabadi and C. E. Kessel, "Development of a Visualization Tool for the ARIES Systems Code," Fusion Science and Technology, 60 (2) August 2011, 459-463.

A.I-135
J. A. Burke, M. S. Tillack, and the ARIES Team, "Optimization of the ARIES T-tube divertor concept," Fusion Science and Technology, 60 (1) July 2011, 213-217.

A.I-134
X. R. Wang, S. Malang, M. S. Tillack and the ARIES Team, "Innovative First Wall Concept Providing Additional Armor at High Heat Flux Regions," Fusion Science and Technology, 60 (1) July 2011, 308-312.

A.I-133
X. R. Wang, S. Malang, M. S. Tillack and the ARIES Team, "High Performance Divertor Target Concept for a Power Plant: a Combination of Plate and Finger Concepts," Fusion Science and Technology, 60 (1) July 2011, 218-222.

A.I-132
S. Yuspeh, Y. Ueno, M. S. Tillack, R. Burdt, Y. Tao, and F. Najmabadi, "Cavity formation in a liquid Sn droplet driven by laser ablation pressure for an extreme ultraviolet light source target," J. Applied Physics 109, 076102 (2011).

A.I-131
Russell A. Burdt, Yoshifumi Ueno, Yezheng Tao, Sam Yuspeh, Mark S. Tillack and Farrokh Najmabadi, "Recombination effects during expansion into vacuum in laser produced Sn plasma," Applied Physics Letters, 97 041502 (2010).

A.I-130
Nek. M. Shaikh, Y. Tao, R. A. Burdt, S. Yuspeh, N. Amin, and M. S. Tillack, "Spectroscopic analysis of temperature and density of Sn plasma produced by a CO₂ laser," Journal of Applied Physics 108, 083109 (2010).

A.I-129
Y. Tao, M. S. Tillack, S. Yuseph, R. Burdt, and F. Najmabadi, "Non-classical hydrodynamic behavior of Sn plasma irradiated with a long CO₂ laser pulse," Applied Physics B 99 (2010) 397-400.

A.I-128
M. S. Tillack, A. R. Raffray, X. R. Wang, S. Malang, S. Abdel-Khalik, M. Yoda and D. Youchison "Recent US Activities on Advanced He-Cooled W-Alloy Divertor Concepts for Fusion Power Plants," Fusion Engineering and Design, 86 (2011) pp. 71-98.

A.I-127
S. Yuspeh, K. L. Sequoia, Y. Tao, M. S. Tillack, R. Burdt and F. Najmabadi, "Heating dynamics and extreme ultraviolet radiation emission of laser-produced Sn plasmas," Applied Physics Letters, 96, 261501 (2010).
(also appears in the Virtual Journal of Ultrafast Science, August 2010).

A.I-126
J. D. Sethian, D. G. Colombant, J. L. Giuliani, R. H. Lehmberg, M. C. Myers, S. P. Obenschain, A. J. Schmitt, J. Weaver, M. F. Wolford, F. Hegeler, M. Friedman, A. E. Robson, A. Bayramian, J. Caird, C. Ebbers, J. Latkowski, W. Hogan, W. R. Meier, L. J. Perkins, K. Schaffers, S. Abdel Kahlik, K. Schoonover, D. Sadowski, K. Boehm, L. Carlson, J. Pulsifer, F. Najmabadi, A. R. Raffray, M. S. Tillack, G. Kulcinski, J. P. Blanchard, T. Heltemes, A. Ibrahim, E. Marriott, G. Moses, R. Radell, M. Sawan, J. Santarius, G. Sviatoslavsky, S. Zenobia, N. M. Ghoniem, S. Sharafat, J. El-Awady, Q. Hu, C. Duty, K. Leonard, G. Romanoski, L. L. Snead, S. J. Zinkle, C. Gentile, W. Parsells, C. Prinksi, T. Kozub, T. Dodson, D. V. Rose, T. Renk, C. Olson, N. Alexander, A. Bozek, G. Flint, D. T. Goodin, J. Hund, R. Paguio, R. W. Petzoldt, D. G. Schroen, J. Sheliak, T. Bernat, D. Bittner, J. Karnes, N. Petta, J. Streit, D. Geller, J. K. Hoffer, M. W. McGeoch, S. C. Glidden, H. Sanders, D. Weidenheimer, D. Morton, I. D. Smith, M. Bobecia, D. Harding, T. Lehecka, S. B. Gilliam, S. M. Gidcumb, D. Forsythe, N. R. Parikh, S. O'Dell, M. Gorensek, "The Science and Technologies for Fusion Energy With Lasers and Direct-Drive Targets," IEEE Transactions on Plasma Science 38(4), Part 2 (2010) 690-703.

A.I-125
L. J. Carlson, D. T. Goodin and M. S. Tillack, "A Method for Characterizing and Improving the Damage Resistance of the Outer Metallic Coatings on Inertial Fusion Energy Targets," IEEE Transactions on Plasma Science 38(3), March 2010 (448-451).

A.I-124
L. C. Carlson, M. S. Tillack, J. Stromsoe, N.B. Alexander, G.W. Flint, D.T. Goodin, R.W. Petzoldt, "Completing the Viability Demonstration of Direct-Drive IFE Target Engagement and Assessing Scalability to a Full-Scale Power Plant," Transactions on Plasma Science 38(3) March 2010, 300-305.

A.I-123
Russell A. Burdt, Yezheng Tao, Sam Yuspeh, Nek Shaikh, Mark S. Tillack, Eli Flaxer, and Farrokh Najmabadi, "Laser wavelength effects on the charge state resolved ion energy distributions from laser-produced Sn plasma," Journal of Applied Physics 107, 1 (2010).

A.I-122
Y. Tao, M. S. Tillack, N. Amin, 2, R. A. Burdt, S. Yuspeh, N. M. Shaikh, and F. Najmabadi, "Flexible CO₂ laser system for fundamental research related to an extreme ultraviolet lithography source," Review of Scientific Instruments 80, 123503 (2009).

A.I-121
A. R. Raffray, R. Nygren, D. G. Whyte, S. Abdel-Khalik, R. Doerner, F. Escourbiac, T. Evans, R. J. Goldston, D. T. Hoelzer, S. Konishi, P. Lorenzetto, M. Merola, R. Neu, P. Norajitra, R. Pitts, M. Rieth, M. Roedig, T. Rognlien, S. Suzuki, M. S. Tillack, C. Wong "High Heat Flux Components - Readiness to Proceed from Near Term Fusion Systems to Power Plants," Fusion Engineering and Design 85 (2010) 93-108.

A.I-120
Y. Tao, M. S. Tillack, S. Yuspeh, R. A. Burdt, N. Sheikh, N. Amin, and F. Najmabadi, "Interaction of a CO₂ laser pulse with tin-based plasmas for an extreme ultraviolet lithography source," Transactions on Plasma Science 38 Issue 4, Part 2 (2010) 714 - 718.

A.I-119
R. A. Burdt, S. Yuspeh, K. L. Sequoia, Y. Tao, M. S. Tillack and F. Najmabadi, "Experimental scaling law for mass ablation rate from a Sn plasma generated by a Nd:YAG laser," Journal of Applied Physics 106, 033310 (2009).

A.I-118
S. Yuspeh, K. L. Sequoia, Y. Tao, M. S. Tillack, R. A. Burdt and F. Najmabadi, "Optimization of the size ratio of Sn sphere and laser focal spot for an extreme ultraviolet light source," Applied Physics Letters 93, 221503 (2008).

A.I-117
M. S. Tillack, A. D. Turnbull, L. M. Waganer, S. Malang, D. Steiner, J. P. Sharpe, L. C. Cadwallader, L. El-Guebaly, A. R. Raffray, F. Najmabadi, R. J. Peipert Jr., T. L. Weaver, and the ARIES Team, "An Evaluation of Fusion Energy R&D Gaps using Technology Readiness Levels," Fusion Science and Technology, 56 (2) August 2009, 949-956.

A.I-116
L. C. Carlson, M. S. Tillack, J. Stromsoe, N. A. Alexander, D. T. Goodin and R. W. Petzoldt, "Improving the Accuracy of a Target Engagement Demonstration," Fusion Science and Technology 56 (1) July 2009, 409-416.

A.I-115
M. S. Tillack and J. E. Pulsifer, "Long-term Survival of Grazing-incidence Metal Mirrors for Laser Fusion," Fusion Science and Technology, 56 (1) July 2009, 446-451.

A.I-114
Y. Tao, M. S. Tillack, K. L. Sequoia, R. A. Burdt, S. Yuspeh and F. Najmabadi "Efficient 13.5 nm extreme ultraviolet emission from Sn plasma irradiated by a long CO₂ laser pulse," Applied Physics Letters 92, 251501 (2008).

A.I-113
K. L. Sequoia, Y. Tao, S. Yuspeh, R. Burdt, and M. S. Tillack, "Two dimensional expansion effects on angular distribution of 13.5 nm in-band EUV emission from laser-produced Sn plasma," Applied Physics Letters 92 221505 (2008).
(also appears in the Virtual Journal of Ultrafast Science, July 2008).

A.I-112
Lane Carlson, Neil Alexander, Graham Flint, Dan Goodin, Thomas Lorentz, Ronald Petzoldt and Mark Tillack, "Target Tracking and Engagement for Inertial Fusion Energy: A Tabletop Demonstration," Fusion Science and Technology 52(3), October 2007, 478-482.

A.I-111
Ron Petzoldt, Neil Alexander, Lane Carlson, Graham Flint, Dan Goodin, Jon Spalding and Mark Tillack, "A Continuous, In-Chamber Target Tracking and Engagement Approach for Laser Fusion," Fusion Science and Technology 52(3), October 2007, 454-458.

A.I-110
J. D. Spalding, L. C. Carlson, M. S. Tillack, N. B. Alexander, D. T. Goodin and R. W. Petzoldt, "Longitudinal Tracking of Direct Drive Inertial Fusion Targets," Fusion Science and Technology 52(3), October 2007, 435-439.

A.I-109
Y. Tao, M. S. Tillack, S. S. Harilal, K. L. Sequoia, R. A. Burdt, and F. Najmabadi "Mass-limited Sn target irradiated by dual laser pulses for an extreme ultraviolet lithography source," Optics Letters Vol. 32, No. 10, May 15, 2007.
(also appears in the Virtual Journal of Ultrafast Science, May 2007)

A.I-108
M. V. Mathew, S. S. Harilal and M. S. Tillack "Emission characteristics and dynamics of neutral species in a laser-produced tin plasma," J. Physics D: Applied Physics 39 (2006) 1-6.

A.I-107
Y. Tao, M. S. Tillack, S. S. Harilal, K. L. Sequoia, and F. Najmabadi, "Investigation of the interaction of a laser pulse with a preformed Gaussian Sn plume for an extreme ultraviolet lithography source," Journal of Applied Physics 101 (2), 023305 (2007).
(also appears in the Virtual Journal of Ultrafast Science, February 2007)

A.I-106
A. R. Raffray, R. Petzoldt, J. Pulsifer, M. S. Tillack, X. Wang, "Thermal Behavior and Operating Requirements of IFE Direct-Drive Target," Fusion Science & Technology 44(1) July 2003, pp 111-116.

A.I-105
Dai-Kai Sze, Michael C. Billone, Thanh Q. Hua, Mark Tillack, Farrokh Najmabadi, Xueren Wang, Siegfried Malang, Laila A. El-Guebaly, Igor N. Sviatoslavsky, James P. Blanchard, Jeffrey A. Crowell, Hesham Y. Khater, Elsayed A. Mogahed, Lester M. Waganer, Dennis Lee, Dick Cole "The ARIES-RS power core - recent development in Li/V designs," Fusion Engineering and Design 41 (1998) 371-376.

A.I-104
Y. Tao and, M. S. Tillack, "Mitigation of fast ions from laser-produced Sn plasma for an extreme ultraviolet lithography source" Appl. Phys. Lett. 89, 111502 (2006).
(also appears in the Virtual Journal of Ultrafast Science, October 2006)

A.I-103
Y. Tao, S. S. Harilal, M. S. Tillack, K. L. Sequoia, B. O'Shay, and F. Najmabadi, "Effect of focal spot size on in-band 13.5 nm extreme ultraviolet emission from laser-produced Sn plasma," Optics Letters 31, 2496 (2006).
(also appears in the Virtual Journal of Ultrafast Science, August 2006)

A.I-102
Y. Tao, M. S. Tillack, S. S. Harilal, K. L. Sequoia, B. O'Shay and F. Najmabadi, "Effect of shockwave-induced density jump on laser plasma interactions in low-pressure ambient air," J. Phys. D: Applied Physics 39 (2006) 4027-4030.

A.I-101
S. S. Harilal, B. O'Shay, Y. Tao and M. S. Tillack, "Ion debris mitigation from tin plasma using ambient gas, magnetic field and combined effects," Applied Physics B 86, 547-553, (2007).

A.I-100
S. S. Harilal, Beau O'Shay, Yezheng Tao and Mark S. Tillack, "Ambient gas effects on the dynamics of laser-produced tin plume expansion," Journal of Applied Physics 99, 083303 (2006).

A.I-99
S. S. Harilal, M. S. Tillack, Y. Tao, B. O'Shay, R. Paguio and A. Nikroo, "Extreme ultraviolet spectral purity and magnetic ion debris mitigation with low density tin targets," Optics Letters 31 (10) 1549-1551 (May 15, 2006).

A.I-98
Farrokh Najmabadi, The ARIES Team: A. Abdou, L. Bromberg, T. Brown, V.C. Chan, M.C. Chu, F. Dahlgren, L. El-Guebaly, P. Heitzenroeder, D. Henderson, H.E. St. John, C.E. Kessel, L.L. Lao, G.R. Longhurst, S. Malang, T.K. Mau, B.J. Merrill, R.L. Miller, E. Mogahed, R.L. Moore, T. Petrie, D.A. Petti, P. Politzer, A.R. Raffray, D. Steiner, I. Sviatoslavsky, P. Synder, G.M. Syaebler, A.D. Turnbull, M.S. Tillack, L.M. Waganer, X. Wang, P. West, P. Wilson
"The ARIES-AT advanced tokamak, Advanced technology fusion power plant," Fusion Engineering and Design 80 (2006) 3-23.

A.I-97
Lester M. Waganer, Farrokh Najmabadi, Mark Tillack, Xueren Wang, Laila El-Guebaly, and The ARIES Team
"Design approach of the ARIES-AT power core and vacuum vessel cost assessment," Fusion Engineering and Design 80 (2006) 181-200.

A.I-96
R. Raffray, W. Meier, S. Abdel-Khalik, R. Bonazza, P. Calderoni, C. S. Debonnel, Z. Dragojlovic, L. El-Guebaly, D. Haynes, J. Latkowski, C. Olson, P. Peterson, S. Reyes, P. Sharpe, M. S. Tillack and M. Zaghloul, "IFE Thick Liquid Wall Chamber Dynamics: Governing Mechanisms and Modeling and Experimental Capabilities," Fusion Science and Technology 49 January 2006.

A.I-95
S. S. Harilal, J. O'Shay, M. S. Tillack, Y. Tao, R. Paguio, A. Nikroo and C. A. Back, "Spectral control of emissions from Sn-doped targets for EUV lithography," J. Phys. D: Applied Physics 39 (2006) 484-487.

A.I-94
S. S. Harilal, J. O'Shay and M. S. Tillack, "Debris Mitigation in a Laser-Produced Tin Plume Using a Magnetic Field," J. Applied Physics 98, 1 (August 2005).

A.I-93
W. Kowbel and M. S. Tillack, "Hybrid Al/SiC composite optics for IFE applications," Fusion Science & Technology 47 (3), April 2005, 596-600.

A.I-92
S. S. Harilal, Beau O'Shay, Mark. S. Tillack and Manoj V. Mathew, "Spectroscopic Characterization of Laser-induced Tin Plasma," J. Applied Physics 98, 013306 (July 2005).

A.I-91
S. S. Harilal, B. O'Shay, M. S. Tillack, C. V. Bindhu, F. Najmabadi, "Fast photography of a laser generated plasma expanding across a transverse magnetic field," IEEE Transactions on Plasma Science 33 (2) April 2005, 474-475.

A.I-90
D.T. Goodin, N.B. Alexander, L.C. Brown, D.A. Callahan, P. Ebey, D.T. Frey, R. Gallix, D. Geller, C.R. Gibson, J. Hoffer, J.L. Maxwell, B.W. McQuillan, A. Nikroo, A. Nobile, C. Olson, R.W. Petzoldt, R. Raffray, W.S. Rickman, G. Rochau, D.G. Schroen, J. Sethian, J. Sheliak, J.E. Streit, M. Tillack, B.A. Vermillion, and E.I. Valmianski, "Demonstrating a Target Supply for Inertial Fusion Energy," Fusion Science & Technology 47 (4), April 2005, 1131-1138.

A.I-89
B. Christensen, A. R. Raffray, M. S. Tillack, "Modeling DT Vaporization and Melting in a Direct Drive Target," Fusion Science & Technology 47 (4), April 2005, 1180-1186.

A.I-88
B. Christensen, A. R. Raffray, M. S. Tillack, "Thermal Loading of a Direct Drive Target in Rarefied Gas," Fusion Science & Technology 47 (4), April 2005, 1175-1179.

A.I-87
F. Najmabadi, A. R. Raffray, and the ARIES-IFE Team: S. I. Abdel-Khalik, Leslie Bromberg, Laila A. El-Guebaly, D. Goodin, D. Haynes, J. Latkowski, W. Meier, R. Moore, S. Neff, C. L. Olson, J. Perkins, D. Petti, R. Petzoldt, D. V. Rose, W. M. Sharp, P. Sharpe, M. S. Tillack, L. Waganer, D.R. Welch, M. Yoda, S. S. Yu, M. Zaghloul, "Operational Windows for Dry-Wall and Wetted-Wall IFE Chambers," Fusion Sci. & Technology 46 (2004) 401-416.

A.I-86
Rulon Linford, Riccardo Betti, Jill Dahlburg, James Asay, Michael Campbell, Phillip Colella, Jeffrey Freidberg, Jeremy Goodman, David Hammer, Joseph Hoagland, Steve Jardin, John Lindl, Grant Logan, Keith Matzen, Gerald Navratil, Arthur Nobile, John Sethian, John Sheffeld, Mark Tillack, and Jon Weisheit, "A Review of the U.S. Department of Energy's Inertial Fusion Energy Program," Journal of Fusion Energy, Vol. 22, No. 2, June 2003.

A.I-85
D. T. Goodin, N. B. Alexander, L. C. Brown, D. T. Frey, R. Gallix, C. R. Gibson, J. L. Maxwell, A. Nobile, C. Olson, R. W. Petzoldt, R. Raffray, G. Rochau, D. G. Schroen, M. Tillack, W. S. Rickman and B. Vermillion, "A Cost-Effective Target Supply for Inertial Fusion Energy," Nuclear Fusion 44 No 12 (December 2004) S254-S265.

A.I-84
C. V. Bindhu, S. S. Harilal, M. S. Tillack, F. Najmabadi A. C. Gaeris, "Energy Absorption and Propagation in Laser Created Sparks," Applied Spectroscopy 58(6) (June 2004) 719-726.

A.I-83
S. S. Harilal, M. S. Tillack, B. O'Shay, C. V. Bindhu, F. Najmabadi, "Confinement and dynamics of laser-produced plasma expanding across a transverse magnetic field," Phys Rev. E 69 (2004).

A.I-82
C. V. Bindhu, S. S. Harilal, M. S. Tillack, F. Najmabadi A. C. Gaeris, "Laser Propagation and Energy Absorption by an Argon Spark," J. Applied Physics 94 no. 12 (15 Dec. 2003).

A.I-81
M. S. Tillack, D. Blair and S. S. Harilal, "The effect of ionization on cluster formation in laser ablation plumes," Nanotechnology 15, issue 3, pages 390 - 403 (January 2004).

A.I-80
A. R. Raffray, L. El-Guebaly, S. Malang, I. Sviatoslavsky, M. S. Tillack, X. Wang, and the ARIES Team,
"Advanced power core system for the ARIES-AT power plant," Fusion Engineering and Design 80 (2006) 79-98.

A.I-79
D.T. Goodin, A. Nobile, J. Hoffer, A. Nikroo, G. E. Besenbruch, L.C. Brown, J.L. Maxwell, W. R. Meier, T. Norimatsi, J. Pulsifer, W. S. Rickmann, W. Steckle, E. H. Stephens and M. Tillack, "Addressing the Issues of Target Fabrication and Injection for Inertial Fusion Energy," Fusion Engineering & Design 69 (2003) 803-806.

A.I-78
J. D. Sethian, M. Friedman, R. H. Lehmberg, M. Myers, S. P. Obenschain, J. Giuliani, P. Kepple, A. J. Schmitt, D. Colombant, J. Gardner, F. Hegeler, M. Wolford, S. B. Swanekamp, D. Weidenheimer, D. Welch, D. Rose, S. Payne, C. Bibeau, A. Bayramian, R. Beach, K. Schaffers, B. Freitas, K. Skulina, W. Meier, J. Latkowski, L. J. Perkins, D. Goodin, R. Petzolt, E. Stephens, F. Najmabadi, M. Tillack, R. Raffray, Z. Dragojlovic, D. Haynes, R. Peterson, G. Kulcinski, J. Hoffer, D. Geller, D. Schroen, J. Streit, C. Olson, T. Tanaka, T. Renk,G. Rochau, L. Snead, N. Ghoniem and G. Lucas "Fusion Energy with Lasers, Direct Drive Targets and Dry Wall Chambers," Nuclear Fusion 43 (2003) 1693-1709.

A.I-77
R. W. Petzoldt, D. T. Goodin, A. Nikroo, E. Stephens, N. Siegel, N. B. Alexander, A. R. Raffray, T. K. Mau, M. Tillack, F. Najmabadi, S. Krashenninikov and R. Gallix, "Direct Drive Target Survival During Injection in an Inertial Fusion Energy Power Plant," Nuclear Fusion 42 (2002) 1351-1356.

A.I-76
S. S. Harilal, C. V. Bindhu, M. S. Tillack, F. Najmabadi and A. C. Gaeris, "Internal Structure and Expansion Dynamics of Laser Ablation Plumes into Ambient Gases," Journal of Applied Physics 93, 5 (March 1, 2003) 2380-2388.

A.I-75
D.T. Goodin, A. Nobile, N.B. Alexander, L.C. Brown, J.L. Maxwell, J. Pulsifer, A.M. Schwendt, M. Tillack, and R.S. Willms, "A Credible Pathway for Heavy Ion Driven Target Fabrication and Injection," Laser and Particle Beams, vol. 20, no. 4, 2002.

A.I-74
M. S. Tillack, X. R. Wang, J. Pulsifer, S. Malang,
D. K. Sze, M. Billone, I. Sviatoslavsky, and the ARIES Team,
"Fusion power core engineering for the ARIES-ST power plant,"
Fusion Engineering and Design 65 (2003) 215-261.

A.I-73
H. Y. Khater, E. A. Mogahed, D. K. Sze, M. S. Tillack,
X. R. Wang and the ARIES Team
"ARIES-ST Safety Design and Analysis,"
Fusion Engineering and Design 63, 2003.

A.I-72
T. J. Renk, C. L. Olson, T. J. Tanaka, M. A. Ulrickson, G. A. Rochau, R. R. Peterson, I. E. Golovkin, M. O. Thompson, T. R. Knowles, A. R. Raffray and M. S. Tillack, "IFE Chamber Dry Wall Materials Response to Pulsed X-rays and Ions at Power-Plant Level Fluences," Fusion Engineering and Design 65 (2003) 399-406.

A.I-71
S. S. Harilal, C. V. Bindhu, M. S. Tillack, F. Najmabadi and A. C. Gaeris, "Plume Splitting and Sharpening in Laser-produced Aluminum Plasma," Journal of Physics D: Applied Physics 35 (2002) 2935-2938.

A.I-70
J. A. Boedo, D. Rudakov, R. Moyer, S. Krashenninikov, D. Whyte, G. McKee, G. Tynan, M. Schaffer, P. Stangeby, P. West, S. Allen, E. Hollman, A. Leonard, M. Tillack, R. Fonck, G. Antar,
"Transport by Intermittent Convection in the Boundary of DIII-D," Physics of Plasmas 8(11) 2001, pp. 4826-4833.

A.I-69
M. A. Abdou, A. Ying, N. Morley, K. Gulec, S. Smolentsev, M. Kotschenreuther, S. Malang, S. Zinkle. T. Rognlien, P. Fogarty, B. Nelson, R. Nygren, K. McCarthy, M. Z. Youssef, N. Ghoniem, D. Sze, C. Wong, M. Sawan, H. Khater, R. Wooley, R. Mattas, R. Moir, S. Sharafat, J. Brooks, A. Hassanein, D. Petti, M. Tillack, M. Ulrickson, T. Uchimoto
"On the Exploration of Innovative Concepts for Fusion Chamber Technology," Fusion Engineering and Design 54 (2001) 181-247.

A.I-68
R. F. Mattas, J. P. Allain, R. Bastasz, J. N. Brooks, T. Evans, A. Hassanein, S. Luckhardt, K. McCarthy, P. Mioduszewski, R. Maingi, E. Mogahed, R. Moir, S. Molokov, N. Morley, R. Nygren, T. Rognlien, C. Reed, D. Ruzic, I. Sviatoslavsky, D. Sze, M. Tillack, M. Ulrickson, P. M. Wade, R. Wooley, C. Wong,
"ALPS - advanced limiter-divertor plasma-facing systems," Fusion Engineering and Design 49-50 (2000) 127-134.

A.I-67
A. R. Raffray, L. El-Guebaly, S. Gordeev, S. Malang, E. Mogahed,
F. Najmabadi, I. Sviatoslavsky, D. K. Sze, M. S. Tillack,
X. R. Wang, and the ARIES Team,
"High Performance Blanket for ARIES-AT Power Plant,"
Fusion Engineering and Design, 58-59, November 2001, Pages 549-553.

A.I-66
R. Raffray, R. Jones, G. Aiello, M. Billone, L. Giancarli, H. Golfier, A. Hasegawa, Y. Katoh, A. Kohyama, S. Nishio, B. Riccardi and M. S. Tillack
"Design and Material Issues for High Performance SiC_f/SiC-Based
Fusion Power Core,"
Fusion Engineering and Design 55 (2001) 55-95.

A.I-65
A. R. Raffray, L. El-Guebaly, S. Malang, I. Sviatoslavsky,
M. S. Tillack, X. Wang, and the ARIES Team,
"ARIES-AT Blanket and Divertor,"
Fusion Technology 39 (2001) 429-433.

A.I-64
D. K. Sze, K. A. McCarthy, M. Sawan, M. S. Tillack,
A. Ying and S. Zinkle,
"Flibe Assessments,"
Fusion Technology 39 (2001) 746-752.

A.I-63
M. S. Tillack, F. Najmabadi, L. A. El-Guebaly, D. T. Goodin,
W. R. Meier, J. Perkins, R. R. Peterson, D. A. Petti, K. R. Schultz,
J. D. Sethian, L. M. Waganer, and the ARIES Team,
"ARIES Inertial Fusion Chamber Assessment,"
Fusion Technology 39 (2001) 343-349.

A.I-62
D. K. Sze, M. S. Tillack, and L. El-Guebaly,
"Blanket system selection for the ARIES-ST,"
Fusion Engineering and Design 48 (2000) 371-378.

A.I-61
B. G. Logan, W. R. Meier, Ralph W. Moir, M. A. Abdou, P. F. Peterson,
G. L. Kulcinski, M. S. Tillack, J. F. Latkowski, David Petti,
K. R. Schultz, A. Nobile,
"Progress and Critical Issues for IFE Blanket and Chamber Research,"
Fusion Engineering and Design 51-52 (2000) p. 1095-1101.

A.I-60
M. S. Tillack, X. R. Wang, J. Pulsifer, I. Sviatoslavsky
and the ARIES Team,
"ARIES-ST Plasma-Facing Component Design and Analysis,
Fusion Engineering and Design 49-50 (2000) 363.

A.I-59
M. S. Tillack, X. R. Wang, J. Pulsifer, S. Malang, D. K. Sze,
and the ARIES Team,
"ARIES-ST Breeding Blanket Design and Analysis,"
Fusion Engineering and Design 49-50 (2000) 689.

A.I-58
C. C. Baker, R. W. Conn, F. Najmabadi, and M. S. Tillack,
"Status and Prospects for Fusion Energy from Magnetically Confined Plasmas,"
Energy 23 (7/8) pp. 649-694, 1998.

A.I-57
E. T. Cheng, R. Cerbone, M. Peng, J. D. Galambos, D. Strickler,
I. Sviatoslavsky, C. P. C. Wong, D. K. Sze, X. R. Wang, M. Simnad,
and M. S. Tillack,
"Progress of the ST-VNS Study,"
Fusion Technology 34 (3) 1998, p. 1066-1070.

A.I-56
R.F. Mattas, R. Bastasz, J. Brooks, A. Hassanein, S. Luckhardt,
K. McCarthy, P. Mioduszewski, E. Mogahed, R. Moir, N. Morely,
R. Nygren, C. Reed, D. Ruzic, I. Sviatoslavsky, D. Sze, M. S. Tillack,
P.M. Wade, K. Wilson, R. Wooley, C. Wong,
"U.S. Assessment of Advanced Limiter-divertor Plasma-facing
Systems (ALPS) - Design, Analysis, and R&D Needs,"
Fusion Technology 34 (3) 1998, p. 345-350.

A.I-55
Y. Hirooka and M. S. Tillack,
"Modular Application of Moving-Belt Plasma-Facing Components
for Particle and Heat Removal from a Steady-State Fusion System,"
Fusion Technology 34 (3) 1998, p. 946-950.

A.I-54
S. Malang, F. Najmabadi, L. M. Waganer, and M. S. Tillack,
"ARIES-RS Maintenance Approach for High Availability,"
Fusion Eng. and Design. 41 (1998) 377-383.

A.I-53
S. Malang, H. Schnauder, and M. S. Tillack,
"Combination of a Self-Cooled Liquid Metal Breeder
Blanket with a Gas Turbine Power Conversion System,"
Fusion Eng. and Design. 41 (Sept. 1998) 561.

A.I-52
E. T. Cheng, Y. K. Peng, R. Cerbone, P. Fogarty, J. D. Galambos,
E. A. Mogahed, B. Nelson, M. Simnad, I. Sviatoslavsky, and M. S. Tillack,
"Study of a Spherical Tokamak Based Volumetric Neutron Source,"
Fusion Engineering and Design 38(3) 219-255, Jan. 1997.

A.I-51
C. P. C. Wong, E. Chin, T. W. Petrie, E. E. Reis, M. S. Tillack,
X. Wang, I. Sviatoslavsky, S. Malang, D. K. Sze, and the ARIES Team,
"ARIES-RS Divertor System Selection and Analysis,"
Fusion Eng. and Design. 38 (1997) 115-137.

A.I-50
D. Steiner, L. El-Guebaly, S. Herring, H. Khater, S. Malang,
E. Mogahed, M. S. Tillack, R.Thayer, and the ARIES Team,
"ARIES-RS Safety Design and Analysis,"
Fusion Eng. and Design 38 (1997) 189-218.

A.I-49
M. S. Tillack, S. Malang, L. Waganer, X. R. Wang,
D. K. Sze, L. El-Guebaly, C. P. C. Wong, J. A. Crowell,
T. K. Mau, L. Bromberg, and the ARIES Team,
"Configuration and Engineering Design of the ARIES-RS Tokamak Power Plant,"
Fusion Eng. and Design 38 (1997) 87-113.

A.I-48
R. W. Conn, F. Najmabadi, and M. S. Tillack,
"Prospects and Issues for Magnetic Fusion Power Systems,"
Fusion Eng. and Design 41 (Sept. 1998) 337-347.

A.I-47
M. S. Tillack and the ARIES Team,
"Engineering Design of the ARIES-RS Power Plant,"
Fusion Eng. and Design. 41 (1998) 491-499.

A.I-46
M. S. Tillack and the ARIES Team,
"Engineering Overview of ARIES-RS Tokamak Power Plant,"
Fusion Technology 1996, 1855.

A.I-45
D. K. Sze, M. S. Tillack, I. N. Sviatoslavsky,
L. A. El-Guebaly, C. P. C. Wong, L. M. Waganer, and the ARIES Team,
"Blanket Selection for the Starlite Project",
Fusion Technology 30 (3) 2A, Dec. 1996, 995.

A.I-44
M. S. Tillack, C. G. Bathke, L. A. El-Guebaly,
R. L. Miller, and the ARIES Team,
"Tradeoffs Between Improved Performance and Increased
Cost of Advanced Materials in Commercial Power Plants",
Fusion Technology 30 (3) 2B, Dec. 1996, 1594.

A.I-43
R. W. Conn, F. Najmabadi, M. S. Tillack, Y. Seki, Yu. A. Sokolov,
J. Cleveland, and V. V. Demchenko,
"Fusion Reactor Design and Technology,"
Nuclear Fusion, 34 (5), 1994 (pp. 747-768).

A.I-42
G. Federici, R. Matera, S. Chiocchio, D. Driemeyer, J. Haines,
M. S. Tillack, and M. Ulrickson,
"Innovative Design and Material Solutions of Thermal
Contact Layers for High-Heat-Flux Applications in Fusion",
Fusion Technology 26, 1994 (pp. 493-497).

A.I-41
M. S. Tillack, S. Sharafat, M. Youssef, S. Herring,
S. Malang, and D. K. Sze,
"Fusion Nuclear Technology and Materials: Status and R&D Needs,"
Fusion Eng. and Design 25 (1994) 21-34.

A.I-40
M. S. Tillack and R. D. Abelson,
"Interface Conductance Between Roughened Be and Steel
Under Thermal Deformation,"
Fusion Eng. and Design 27 (1995) 232-239.

A.I-39
M. S. Tillack and N. B. Morley,
"Flow Balancing in Liquid Metal Blankets,"
Fusion Eng. and Design 27 (1995) 735-741.

A.I-38
P. Gierszewski, M. Dalle Donne, H. Kawamura, and M. S. Tillack,
"Ceramic Pebble Bed Development for Fusion Blankets,"
Fusion Eng. and Design 27 (1995) 167-178.

A.I-37
N. B. Morley, A. Gaizer, M. S. Tillack and M. A. Abdou,
"Initial LM-MHD Thin Film Flow Experiments in the MeGA-Loop
Facility at UCLA,"
Fusion Engineering and Design 27 (1995) 725-730.

A.I-36
G. Federici, R. Matera, S. Chiocchio, J. Dietz, G. Janeschitz,
D. Driemeyer, J. Haines, M. S. Tillack, and M. Ulrickson,
"Design, Materials and R&D Issues of Innovative Thermal
Contact Joints for High Heat Flux Applications,"
Fusion Eng. and Design 28 (1995) 34-43.

A.I-35
Z. R. Gorbis, M. S. Tillack, F. Tehranian, and M. A. Abdou,
"Analysis of Wall-Packed Bed Thermal Interactions,"
Fusion Eng. and Design 27 (1995) 216-225.

A.I-34
J. E. Eggleston, M. A. Abdou and M. S. Tillack,
"Analysis of the Energy Transport and Deposition Within the
Reaction Chamber of the Prometheus Inertial Fusion Energy Reactor,"
Fusion Eng. and Design 27 (1995) 226-231.

A.I-33
M. A. Abdou, A. Y. Ying, M. S. Tillack, N. M. Ghoniem,
L. M. Waganer, D. E. Driemeyer, G. J. Linford, and D. J. Drake,
"Critical Technical Issues and Evaluation and Comparison Studies
for Inertial Fusion Energy Reactors,"
Fusion Engineering and Design 23 (1993) pp. 251-297.

A.I-32
F. Tehranian, M. A. Abdou, and M. S. Tillack,
"Effect of External Pressure on Particle Bed Effective Thermal Conductivity,"
J. Nucl. Mater. 212-215 (1994) 885-890.

A.I-31
N. B. Morley and M. S. Tillack,
"Examination of Stability Calculations for Liquid
Metal Film Flows in a Coplanar Magnetic Field,"
Magnetohydrodynamics. 2, 1993, pp. 69-75.

A.I-30
A. R. Raffray, M. S. Tillack, M. A. Abdou,
"Thermal Control of Ceramic Breeder Blankets,"
Fusion Technology 23 (3), May 1993, 281.

A.I-29
M. S. Tillack, A. R. Raffray, A. Y. Ying, M. A. Abdou, and P. Huemer,
"Experimental Studies of Active Temperature Control
in Solid Breeder Blankets,"
Fusion Eng. & Design 17 (1991) pp. 165-170.

A.I-28
A. R. Raffray, A. Y. Ying, Z. Gorbis, M. S. Tillack, M. A. Abdou,
"Thermal Control of Solid Breeder Blankets,"
Fusion Eng. & Design 17 (1991) pp. 131-137.

A.I-27
L. Bromberg and M. S. Tillack,
"Innovative Design Options for Internal Coils,"
Fusion Technology 19 (3), 921, May 1991.

A.I-26
A. Y. Ying and M. S. Tillack,
"MHD Heat Transfer in Elongated Rectangular Ducts for
Liquid Metal Blankets,"
Fusion Technology 19 (3), 990, May 1991.

A.I-25
N. B. Morley, M. S. Tillack and M. A. Abdou,
"Analysis of Thin Film Liquid Metal Protection of Fusion
Reactor Limiter/Divertor Surfaces,"
Fusion Technology 19 (3), 1765, May 1991.

A.I-24
T. Kunugi, M. S. Tillack, and M. A. Abdou,
"Analysis of Liquid Metal MHD Fluid Flow and Heat
Transfer Using the KAT Code,"
Fusion Technology 19 (3), 1000, May 1991.

A.I-23
M. A. Abdou, M. S. Tillack, and A. R. Raffray,
"Thermal, Fluid Flow and Tritium Release Problems in Fusion Blankets,"
Fusion Technology 18 (2) Sept. 1990 (pp. 157-200).

A.I-22
M. S. Tillack, "Examination of MHD Fluid Flow in Geometric
Elements of a Fusion Reactor Blanket Using the Core Flow Approach,"
Fusion Eng. & Design 8 (1989) p. A-173.

A.I-21
K. A. McCarthy, M. S. Tillack, and M. A. Abdou,
"Analysis of Liquid Metal MHD Flow Using an Iterative Method
to Solve the Core Flow Equations,"
Fusion Eng.&Design 8 (1989) pp. 256-264.

A.I-20
A. R. Raffray, M. A. Abdou, M. S. Tillack, M. Z. Youssef, and Y. Watanabe,
"Tritium-Producing Blanket for Fusion Engineering Facility,"
Fusion Eng. & Design 8 (1989) p. A-101.

A.I-19
A. Y. Ying, A. S. Lavine, and M. S. Tillack,
"The Effect of Hartmann and Side Layers on Heat Transfer in
Magnetohydrodynamic Flow,"
Fusion Technology, 15 (2), Part 2, pp. 1169-1173, March 1989.

A.I-18
A. R. Raffray, M. A. Abdou, P. Chou, Z. Gorbis, M. S. Tillack,
Y. Watanabe, and A. Ying,
"Helium-Cooled Solid Breeder Blanket for ITER,"
Fusion Technology, 15 (2), Part 2, pp. 858-863, March 1989.

A.I-17
Z. R. Gorbis, A. R. Raffray, M. S. Tillack, and M. A. Abdou,
"Thermal Resistance Gaps for Solid Breeder Blankets Using Packed Beds,"
Fusion Technology, 15 (2), Part 2, pp. 695-698, March 1989.

A.I-16
M. A. Abdou, A. R. Raffray, Z. R. Gorbis, M. S. Tillack,
Y. Watanabe, A. Y. Ying, M. Z. Youssef, and K. Fujimura,
"A Helium-Cooled Solid Breeder Concept for the Tritium-Producing
Blanket of the International Thermonuclear Experimental Reactor,"
Fusion Technology 15 (2), Part 1, March 1989, pp. 166-182.

A.I-15
M. A. Abdou, A. H. Hadid, A. R. Raffray, M. S. Tillack, T. Iizuka,
P. J. Gierszewski, R. J. Puigh, D. K. Sze, and B. Picologlou,
"Modeling, Analysis, and Experiments for Fusion Nuclear Technology,"
Fusion Engineering and Design, 6, 1988 (pp. 3-64).

A.I-14
K. Taghavi, M. S. Tillack, and H. Madarame,
"Special Features of First Wall Heat Transfer in Liquid
Metal Fusion Reactor Blankets,"
Fusion Technology, 12 (1), July 1987.

A.I-13
M. A. Abdou, P. J. Gierszewski, M. S. Tillack, M. Nakagawa,
J. Reimann, D. K. Sze, J. Bartlit, J. Grover, R. Puigh, and R. T. McGrath,
"Technical Issues and Requirements of Experiments and Facilities
for Fusion Nuclear Technology,"
Nuclear Fusion, 27, (4) (1987) 619-688.

A.I-12
M.A. Abdou, P. Gierszewski, M. S. Tillack, A. R. Raffray,
D. K. Sze, and R. Puigh,
"Blanket Material and Engineering Issues, and Requirements
for Experiments and Facilities,"
Journal of Nuclear Materials 141-143, pp. 10-18, 1986.

A.I-11
M. S. Tillack, D. K. Sze, and M. A. Abdou,
"Required Momentum, Heat, and Mass Transport Experiments
for Liquid Metal Blankets,"
Fusion Technology 10 (3), p. 1088, November 1986.

A.I-10
M. Abdou, P. Gierszewski, M. S. Tillack, J. Grover, R. Puigh, D. K. Sze, and D. Berwald, "Technical Requirements of Experiments and Facilities for Fusion Nuclear Technology," Fusion Technology 10 (3), p. 1065, November 1986.

A.I-9
H. Madarame and M. S. Tillack, "MHD Flow in Liquid Metal Blankets with Helical Vanes," Journal of the Faculty of Engineering, The University of Tokyo (B), 38, (4) (1986), pp. 1-18.

A.I-8
M. A. Abdou, P. J. Gierszewski, M. S. Tillack, K. Taghavi, K. Kleefeldt, G. Bell, H. Madarame, Y. Oyama, D. H. Berwald, J. K. Garner, R. Whitley, J. Straalsund, R. Burke, J. Grover, E. Opperman, R. Puigh, J. W. Davis, G. D. Morgan, G. Deis, M. C. Billone, K. I. Thomassen, and D. L. Jassby, "A Study of the Issues and Experiments for Fusion Nuclear Technology," Fusion Technology, 8 (3), pp. 2595-2645, November 1985.

A.I-7
M. S. Tillack, M. S. Kazimi, and L. M. Lidsky, "Measurement of Small Strains in a Noisy Environment," Review of Scientific Instruments 56 (9), pp. 1706- 1711, September 1985.

A.I-6
M. S. Tillack, M. S. Kazimi, and L. M. Lidsky, "Structural Responses to Plasma Disruptions in Toroidal Shells," Fusion Technology 8 (1), pp. 239-244, July 1985.

A.I-5
H. Madarame, K.Taghavi, and M. S. Tillack, "The Influence of Leakage Currents on MHD Pressure Drop," Fusion Technology 8 (1), pp. 264-269, July 1985.

A.I-4
J. K. Garner, J. Blanchard, G. Orient, K. Taghavi,
M. S.Tillack, M. Youssef, K. Shin, and H. Madarame, "A Module for Testing a Lithium Cooled Tokamak Blanket in a Tandem Mirror Test Reactor," Fusion Technology 8 (1), pp. 962-967, July 1985.

A.I-3
M. S. Tillack, et al., "Identification and Characterization of the Key Issues of Fusion Nuclear Technology," Fusion Technology 8 (1), pp. 1091-1099, July 1985.

A.I-2
P. Gierszewski, M. Abdou, G. Bell, J. Blanchard, M. Billone, J. Garner, H. Madarame, G. Orient, K. Shin, K. Taghavi, M. S. Tillack "Engineering Scaling and Quantification of the Test Requirements for Fusion Nuclear Technology," Fusion Technology 8 (1), pp. 1100-1108, July 1985.

A.I-1
M. S. Tillack and M. S. Kazimi, "Modeling of Lithium Fires," Nuclear Technology/ Fusion, 2 (2), pp. 233-245, April 1982.

---

A.II Books and Book Chapters

---

A.II-3
N. B. Morley and M. S. Tillack,
"Magnetohydrodynamics,"
15th Standard Handbook for Electrical Engineers," McGraw-Hill, 2006.

A.II-2
M. S. Tillack and N. B. Morley,
"Magnetohydrodynamics,"
14th Standard Handbook for Electrical Engineers," McGraw-Hill, 1999.

A.II-1
M. S. Tillack, "Application of the Core Flow Approach to MHD Fluid Flow in
Geometric Elements of a Fusion Reactor Blanket,"
in Liquid Metal Magnetohydrodynamics, J. Lielpeteris and R. Moreau editors,
Kluwer Academic Publishers, Dordrecht 1989 (pp. 47-53).

---

A.III Refereed Conference Proceedings

---

A.III-26
Y. Tao, Y. Ueno, S. Yuseph, R. Burdt, M. S. Tillack and F. Najmabadi
"Investigation on the interaction of long duration Nd:YAG laser pulse with Sn plasma for an EUV metrology source," Proc. SPIE 7969, 796930 (2011).

A.III-25
Y. Tao, Y. Ueno, S. Yuspeh, R. A. Burdt, N. Amin, N. M. Shaikh, M. S. Tillack and F. Najmabadi
"Experimental and numerical investigations on the density profile of CO2 laser-produced Sn plasma for an EUVL source," Proc. SPIE Advanced Lithography 2010, Feb.22-25, 2010, San Jose, CA.

A.III-24
N. M. Shaikh, Y. Tao, R. A. Burdt, S. Yuspeh, N. Amin and M. S. Tillack
"Spectroscopic Studies of Tin Plasma Using Laser Induced Breakdown Spectroscopy," Journal of Physics: Conference Series 244 (2010) 042005.

A.III-23
Russell A. Burdt, Sam Yuspeh, Kevin L. Sequoia, Mark S. Tillack, Yezheng Tao, and Farrokh Najmabadi,
"Ablation depth in planar Sn targets during the interaction with a Nd:YAG laser for extreme ultraviolet lithography," Proc. SPIE 7271, 72712Z (2009).

A.III-22
Sam Yuspeh, Kevin L. Sequoia, Yezheng Tao, Mark S. Tillack, Russell A. Burdt, and Farrokh Najmabadi,
"Effects of the ratio of sphere size to laser focal spot on the dominant in-band EUV emitting region," Proc. SPIE 7271, 727136 (2009).

A.III-21
M. S. Tillack, K. L. Sequoia and Y. Tao
"Geometric effects on EUV emissions in spherical and planar targets," Inertial Fusion Science and Applications 2007, Journal of Physics: Conference Series 112 (2008) 042060.

A.III-20
L C Carlson, M S Tillack, T Lorentz, N B Alexander, G W Flint, D T Goodin and R W Petzoldt
"Glint system integration into an IFE target tracking and engagement demonstration," Inertial Fusion Science and Applications 2007, Journal of Physics: Conference Series 112 (2008) 032039

A.III-19
Y. Tao, M. S. Tillack, K. L. Sequoia, R. A. Burdt and F. Najmabadi, "Dynamics of laser-produced Sn-based plasmas for a monochromatic 13.5 nm extreme ultraviolet source," Ultrafast X-Ray Sources and Detectors, edited by Zenghu Chang, George A. Kyrala and Jean-Claude Kieffer, Proc. of SPIE Vol. 6703, 67030A (2007).

A.III-18
Y. Tao, M. S. Tillack, K. L. Sequoia and F. Najmabadi, "A mass-limited Sn target irradiated by dual laser pulses for an EUVL source," Emerging Lithographic Technologies XI, edited by M. J. Lercel, Proc. of SPIE Vol. 6517, 65173Q (2007).

A.III-17
C. A. Back, J. F. Seely, J. L. Weaver, U. Feldman, R. Tommasini, S. G. Glendinning, H.-K. Chung, M. Rosen, R. W. Lee, H. A. Scott, M. S. Tillack and J. D. Kilkenny "Underdense radiation sources: moving towards longer wavelengths," Inertial Fusion Science and Applications 2005, Biarritz France, Sept. 2005, p. 1173.

A.III-16
B. O'Shay, F. Najmabadi, S. S. Harilal, M. Tillack "Nanosecond spectroscopy of expanding laser-produced tin plasma," The 8th International Conference on Laser Ablation, Journal of Physics: Conference Series 59 (2007) 773-777.

A.III-15
M. S. Tillack, K. L. Sequoia, J. O'Shay, C. A. Back and H. A. Scott, "Optimization of plasma uniformity in laser-irradiated underdense targets," Inertial Fusion Science and Applications 2005, Biarritz France, Sept. 2005, p. 985.

A.III-14
D.T. Goodin, A. Nobile, J. Hoffer, D. Geller, J. Sheliak, G.E. Besenbruch, N.B. Alexander, J. Maxwell, D. Schroen, J. Streit, R. Raffray, W. Rickman, M. Tillack, J. Sethian
"From One-of-a-Kind to 500,000 Per Day: The Challenge of Mass-Produced IFE Targets"
20th IAEA Fusion Energy Conference, Vilamoura, Portugal, Nov. 2004.

A.III-13
M. S. Tillack, S. S. Harilal, F. Najmabadi and J. O'Shay, "Magnetic Confinement of an Expanding Laser-Produced Plasma," Inertial Fusion Science and Applications 2003, Monterey CA, Sept. 2003 (pp. 319-322).

A.III-12
M. S. Tillack, J. Pulsifer and K. Sequoia, "UV Laser-Induced Damage to Grazing Incidence Metal Mirrors," Inertial Fusion Science and Applications 2003, Monterey CA, Sept. 2003 (pp. 810-814).

A.III-11
F. Najmabadi, R. Raffray, M. S. Tillack, Dan Goodin, Donald Haynes, Craig Olson, and the ARIES Team
Assessment of Chamber Concepts for Inertial Fusion Energy Power Plants - The ARIES-IFE study
Inertial Fusion Science and Applications 2001,
Kyoto Japan, Sept. 2001, 701-705.

A.III-10
A. R. Raffray, D. A. Haynes, R. R. Peterson, M. S. Tillack, X. Wang and M. Zaghloul
Dry Chamber Wall Thermo-Mechanical Behavior and Lifetime under IFE Cyclic Energy Deposition
Inertial Fusion Science and Applications 2001,
Kyoto Japan, Sept. 2001, 734-737.

A.III-9
J. E. Pulsifer, M. S. Tillack, D. Goodin and R. Petzoldt
"Thermal Control Techniques for Improved DT Layering of Indirect Drive IFE Targets"
Inertial Fusion Science and Applications 2001,
Kyoto Japan, Sept. 2001, 802-805.

A.III-8
M. S. Tillack, S. A. Payne, N. M. Ghoniem, M. R. Zaghloul and J. F. Latkowski,
"Damage threats and response of final optics for laser-fusion power plants"
Inertial Fusion Science and Applications 2001,
Kyoto Japan, Sept. 2001, 717-721.

A.III-7
W.R. Meier, D.T. Goodin, A. Nobile, G. Besenbruch, D. Haynes, J. Hoffer, J. Latkowski, J. Maxwell, F. Najmabadi, A. Nikroo, P. Peterson, R. Petzoldt, W. Rickman, J. Sethian, W. Steckle, E. Stephens, M. Tillack, A. Ying, and M. Yoda, "Addressing Key Science and Technology Issues for IFE Chambers, Target Fabrication and Target Injection," 19th IAEA Fusion Energy Conference, Lyon France, Oct. 14-19, 2002. (IAEA-CN-94/FT/1-3Ra).

A.III-6
D. Blair, M. S. Tillack and M. Zaghloul
"Prediction of particulate characteristics in an expanding laser plume,"
Proc. SPIE, Vol. 4557, 139 (2001); DOI:10.1117/12.442936 (SPIE Conference on Micromachining and Microfabrication 21 - 25 October 2001, San Francisco, CA).

A.III-5
F. Najmabadi, S. Jardin, M. S. Tillack, R. Miller, T. K. Mau,
R. Stambaugh, D. Steiner, L. Waganer and the ARIES Team,
"The ARIES-ST Study: Assessment of the Spherical Tokamak Concept,"
17th IAEA Fusion Energy Conference, Yokohama, 1998.

A.III-4
M. A. Abdou, M. Peng, S. Berk, A. Ying, M. S. Tillack, et al.,
"Requirements and Design Envelope for Volumetric Neutron
Source Fusion Facility for Fusion Nuclear Technology Development,"
15th IAEA International Conference on Plasma Physics and
Controlled Nuclear Fusion Research, IAEA-CN-60/F-II-6 (Oct. 1994).

A.III-3
M. A. Abdou, M. S. Tillack, and A. R. Raffray,
"Thermomechanical Problems in Fusion Reactor Blankets,"
Proceedings of the Fourth International Topical Meeting
on Nuclear Reactor Thermal-Hydraulics, Karlsruhe FRG, Oct. 10-13, 1989.

A.III-2
D. K. Sze, M. A. Abdou, M. S. Tillack, P. J. Gierszewski, and R. Puigh,
"Technical Requirements of Experiments and Facilities for Fusion
Blanket Development,"
International Symposium on Fusion Reactor Blanket
and Fuel Cycle Technology, Japan, October 1986.

A.III-1
M. A. Abdou, P. J. Gierszewski, M. S. Tillack, R. Puigh,
D. K. Sze, and M. Nakagawa,
"Fusion Nuclear Technology Testing Requirements,"
Proceedings of the IAEA Fourth International Technical
Committee Meeting and Workshop on Fusion Reactor Design and
Technology, Yalta, May 26-June 6, 1986 (pp. 151-186).

---

B. Unrefereed Conference Proceedings

---

B-32
C. Koehly, M. S. Tillack, X. R. Wang, Farrokh Najmabadi, S. Malang and the ARIES Team, "Flow distribution systems for liquid metal cooled blankets," 25^th IEEE/NPSS Symposium on Fusion Engineering (SOFE), June 10-14, 2013, San Francisco, CA.

B-31
L. C. Carlson, M. S. Tillack, F. Najmabadi and C. E. Kessel, "ARIES Systems Code Development, Visualization and Application," 24^th IEEE/NPSS Symposium on Fusion Engineering (SOFE), June 26-30, 2011, Chicago, IL.

B-30
A. Baciero, B. Zurro, E.M. Hollmann, M. S. Tillack, C. Clark, E. Blanco and the TJ-II team, "Propagation of cold pulses produced by laser blow-off impurity injection in the TJ-II stellarator," 37^th European Physical Society Conference on Plasma Physics (Dublin, Ireland), 2010.

B-29
B. Zurro, A. Baciero, E. Hollmann, M. Tillack, M. Liniers, A. Fernández, A. Cappa, F. Medina, A. López-Sánchez, I. Pastor, J. Herranz, and TJ-II Team, "Confinement of impurities injected by laser blow-off in the ECRH and NBI regimes of the TJ-II stellarator," 36^th European Physical Society Conference on Plasma Physics (Sofia, Bulgaria), 2009.

B-28
L. J. Carlson, D. T. Goodin and M. S. Tillack, "A Method for Characterizing and Improving the Damage Resistance of the Outer Metallic Coatings on Inertial Fusion Energy Targets," 23^rd IEEE/NPSS Symposium on Fusion Engineering (SOFE), June 1-5, 2009, San Diego, CA.

B-27
L. C. Carlson, M. S. Tillack, J. Stromsoe, N. B. Alexander, G. W. Flint, D. T. Goodin, and R. W. Petzoldt, "Completing the Viability Demonstration of Direct-Drive Inertial Fusion Energy Target Engagement," 23rd IEEE/NPSS Symposium on Fusion Engineering (SOFE), June 1-5, 2009, San Diego, CA.

B-26
J. E. Pulsifer, M. S. Tillack and S. S. Harilal, "Effect of laser pulse duration on damage to metal mirrors for laser IFE," Laser-Induced Damage in Optical Materials: 2007, Proceedings of the SPIE Boulder Damage Conference, Proc. SPIE Vol. 6720, 67200D (Dec. 18, 2007).

B-25
M. S. Tillack and J. E. Pulsifer, "Development of Damage-Resistant Metal Mirrors for Laser-IFE," 22nd IEEE/NPSS Symposium on Fusion Engineering (SOFE), June 17-21, 2007, Albuquerque, NM.

B-24
M. S. Tillack, D. T. Goodin, N. B. Alexander, R. W. Petzoldt, A. R. Raffray, D. Schroen, J. D. Sethian and J. E. Streit, "A Target Fabrication and Injection Facility for Laser-IFE," 20th IEEE/NPSS Symposium on Fusion Engineering (SOFE), October 14-17, 2003, San Diego, CA.

B-23
M. R. Zaghloul, M. S. Tillack, and T. K. Mau
"Sensitivity of Metal Mirrors to Laser-Induced Damage Under Long-Term Exposure at Shallow Angle of Incidence"
Proc. 19th IEEE/NPSS SOFE, Atlantic City NJ, Oct. 2-5, 2001.

B-22
T. K. Mau, M. S. Tillack, and M. R. Zaghloul, "Modeling of Mirror Surface Damage Effects on Beam Propagation in a Laser-Driven IFE Power Plant", Proc. 19th IEEE/NPSS SOFE, Atlantic City NJ, Oct. 2-5, 2001.

B-21
W. Meier, M. Abdou, G. Kulcinski, R. Moir, A. Nobile, P. Peterson,
D. Petti, K. Schultz, M. S. Tillack and M. Yoda,
"Overview of IFE Chamber and Target Technologies R&D in the U.S.,"
proceedings of the 18th IAEA Fusion Energy Conference,
Sorrento Italy, Sept. 2000.

B-20
X. R. Wang, M. S. Tillack, F. Najmabadi, S. Malang and the ARIES Team,
"Configuration and Maintenance of the ARIES-ST Power Plant,"
Proceedings of the 18th IEEE/NPSS Symposium on Fusion Engineering,
Albuquerque, NM, Oct. 1999.

B-19
A. R. Raffray, L. El-Guebaly, D. K. Sze, M. Billone,
E. Mogahed, F. Najmabadi, I. Sviatoslavsky, M. S. Tillack,
X. Wang and the ARIES Team,
"SiC/SiC Composite for Advanced Fusion Power Plant Blanket,"
Proceedings of the 18th IEEE/NPSS Symposium on Fusion
Engineering, Albuquerque, NM, Oct. 1999.

B-18
M. S. Tillack and N. Basu,
"Simulation of gas dynamic behavior in dry-wall inertial
fusion energy chambers,"
Proceedings of the 18th IEEE/NPSS Symposium on
Fusion Engineering, Albuquerque, NM, Oct. 1999.

B-17
X. R. Wang, F. Najmabadi and M. S. Tillack,
"Configuration and Maintenance Options for Low Aspect Ratio Tokamaks,"
17th IEEE/NPSS Symposium on Fusion Engineering, San Diego, CA, Oct. 1997.

B-16 (html)
M. S. Tillack and S. Malang,
"High-Performance PbLi Blanket,"
17th IEEE/NPSS Symposium on Fusion Engineering, San Diego, CA, Oct. 1997.

B-15 (html)
Y. Hirooka, M. S. Tillack, and A. Grossman,
"Steady-State Impurity Control, Heat Removal and Tritium
Recovery by Moving-Belt Plasma-Facing Components,"
17th IEEE/NPSS Symposium on Fusion Engineering, San Diego, CA, Oct. 1997.

B-14 (html)
L. M. Waganer, F. Najmabadi, M. S. Tillack, and the ARIES Team,
"What Must Demo Do?,"
16th IEEE/NPSS Symposium on Fusion Engineering,
Champaign IL, Oct. 1995 (IEEE/95CH35852) pp. 1157-1161.

B-13 (html)
M. S. Tillack, M. Billone, L. El-Guebaly, D. K. Sze,
L. M. Waganer, C. Wong, and the ARIES Team,
"Engineering Options for the U.S. Fusion Demo,"
16th IEEE/NPSS Symposium on Fusion Engineering,
Champaign IL, Oct. 1995 (IEEE/95CH35852) pp. 1202-1205.

B-12
X. R. Wang, D. K. Sze, M. S. Tillack, and C. P. C. Wong,
"Heat Flux Limits on the Plasma-Facing Components of a
Commercial Fusion Power Plant,"
16th IEEE/NPSS Symposium on Fusion Engineering,
Champaign IL, Oct. 1995 (IEEE/95CH35852) pp. 1206-1209.

B-11
M. S. Tillack, N. Ghoniem, A. R. Raffray, M. A. Abdou,
"The Prometheus IFE Reactor Cavity,"
15th IEEE/NPSS Symposium on Fusion Engineering,
Hyannis MA, Oct. 1993 (pp. 993-996).

B-10
M. A. Abdou, A. Y. Ying, M. S. Tillack, et al.,
"Research and Development Assessment for Prometheus Heavy
Ion and Laser Driven Inertial Fusion Reactor Designs,"
15th Symposium on Fusion Engineering, Hyannis MA, Oct. 1993 (pp. 989-992).

B-9
M. S. Tillack, et al.,
"Design and Analysis of the PROMETHEUS Wetted Wall IFE Reactor Cavity,"
14th IEEE/NPSS Symposium on Fusion Engineering,
San Diego, California, October 1-3, 1991 (pp 223-226).

B-8
A. R. Raffray, Z. R. Gorbis, A. Badawi, M. S. Tillack, et al.,
"Model for Determing the Effective Thermal Conductivity of
Particle Beds with High Solid-to-Gas Thermal Conductivity Ratios,"
13th IEEE/NPSS Symposium on Fusion Engineering, Knoxville TN,
October 1989, IEEE-89CH2820-9, Vol.1, pp. 66-69.

B-7
M. S. Tillack, A. Y. Ying, C. Tickle, A. R. Raffray, and M. A. Abdou,
"Experimental Study of the Effective Thermal Conductivity of
a Packed Bed as a Temperature Control Mechanism for ITER
Ceramic Breeder Blanket Designs,"
13th IEEE/NPSS Symposium on Fusion Engineering,
Knoxville TN, October 1989, IEEE-89CH2820-9, Vol.1, pp. 70-73.

B-6
M. S. Tillack, A. Y. Ying, and H. Hashizume,
"The Effect of Magnetic Field Alignment on Heat Transfer in
Liquid Metal Blanket Channels,"
13th IEEE/NPSS Symposium on Fusion Engineering,
Knoxville TN, October 1989 (pp. 376-379).

B-5
M. A. Abdou, M. S. Tillack, and A. R. Raffray,
"Time-Related Parameters in a Fusion Engineering
Facility for Nuclear Technology Testing,"
Proceedings of the 12th IEEE/NPSS Symposium on Fusion
Engineering, Monterey, California, October 12-16, 1987 (pp. 509-512).

B-4
R. F. Mattas, C. C. Baker, Y. Cha, P. A. Finn, S. Majumdar,
B. F. Picologlou, D. K. Sze, H. Stevens, M. A. Abdou,
E. Cheng, A. Hadid, R. Raffray, M. S. Tillack, et al.,
"Blanket Module Testing in TIBER,"
Proceedings of the 12th IEEE/NPSS Symposium on Fusion
Engineering, Monterey, California, October 12-16, 1987 (pp. 1279-1282).

B-3
M. A. Abdou, P. J. Gierszewski, and M. S. Tillack,
"Fusion Nuclear Technology Experiments and Facilities,"
Proceedings of the 11th Symposium on Engineering Problems
of Fusion Research, Austin TX, November 18-22, 1985 (pp. 732-737).

B-2
M. S. Tillack,
"Eddy Current Analysis in Multiply Connected Shells
Using a Circuit Network Model,"
Proceedings of the 11th Symposium on Engineering Problems
of Fusion Research, Austin TX, November 18-22, 1985 (pp. 1056-1059).

B-1
M. A. Firestone, D. I. Brown, C. Kessel, and M. S. Tillack,
"Eddy Current Models for a Tokamak Reactor Vessel and Blanket/Shield,"
Proceedings of the 11th Symposium on Engineering Problems of
Fusion Research, Austin TX, November 18-22, 1985 (pp. 1054-1055).